net2o currently is still experimental and the protocol can have incompatible changes at any time, so keep net2o up to date when you try it. Any day can be a “flag day”.
Get it for Debian GNU/Linux
I've created a Debian repository to make it easy to install net2o.
If you don't have https transport for apt installed, do that first, since I'll redirect you to https in any case:
sudo apt install apt-transport-https
Create a debian sources.list file pointing to the net2o repository, and add my key to the trust db so that Debian can verify the packets, update the repository data and install net2o, so enter:
sudo -s cat >/etc/apt/sources.list.d/net2o.list <<EOF deb [arch=i386,amd64,armhf,armel,arm64,powerpc,mips,mipsel,all] https://net2o.de/debian testing main EOF
Remove the architectures on the list above which you don't need; on
Debian testing, the list is not necessary, on older versions, the “
part is not searched if you don't have that list, then Gforth fails to
install the “
wget -O - https://firstname.lastname@example.org | apt-key add - apt update apt install net2o-gui exit
There are actually three repositories: stable, testing and unstable; at the moment, all packages are the same; when net2o matures, stable/testing/unstable will get different roles, just like Debian (stable=old and rusted, testing=new and somewhat tested, unstable=most recent). Binaries are available for amd64, i386, armhf, arm64, powerpc, armel, mips, and mipsel (in order of how often they get updated). More depend on availability of Debian distributions that run on qemu…
Key information (new Key from October 18th, 2017)
I changed to a Yubikey-based signature. The key's fingerprint is:
60E71A15 93575330 99A0AAF9 CAF021DB 3B7FA946
When you do an
apt-key list, the result should contain this key:
pub 4096R/3B7FA946 2017-09-20 uid Bernd Paysan (yubikey) <email@example.com> sub 4096R/3E1896A1 2017-09-20 sub 4096R/50C9A69B 2017-09-20
Get it in a Docker Container
Pull the docker image from my Dockerhub account with
docker pull forthy42/net2o
Create a directory for the files net2o will use. This will be mounted as
/net2o in the container. A minimal config file is needed for net2o to find
the other data:
mkdir ~/net2o.dk cat <<EOF >~/net2o.dk/config .net2o="/net2o" .net2o-config="/net2o" .net2o-cache="/net2o" EOF
optionally copy other existing net2o files into this directory keeping the directory structure intact.
Create an alias to run the docker:
alias n2o="docker run -ti --rm -v ~/net2o.dk:/net2o --user $(id -u):$(id -g) forthy42/net2o"
Get it in a Snap Container
I created a snap container. You need to get snap for your Linux distribution (in Ubuntu, it's already there).
or the CLI way:
sudo snap install net2o
The net2o snap needs several manual connectors:
snap connect net2o:netlink-connector :netlink-connector snap connect net2o:locale-control :locale-control snap connect net2o:audio-record :audio-record
The netlink connector is needed to detect changing interfaces
- if interfaces change, connections to peers and DHT entries may need to changes.
- locale from the host's settings
- audio recording
And then set an alias
Your data currently resides inside your
~/snap/net2o/current/ hierarchy, but
that needs to change to make it more useful.
Get it for Android
This installs Gforth with the Gforth icons, and a ready-to-run net2o icon in the app drawer. Just tap on the net2o icon to run net2o; you'll be asked to create a key on the first run, and to open up a key on any further run.
The certificate has the SHA-1/SHA256 fingerprint and the informations as follows:
sha-1: 00:44:1B:9D:F8:0B:9D:9E:2F:68:9D:0F:B9:B4:85:28:D4:10:5C:7E sha256: 87:21:D8:3A:FF:47:8D:50:D0:02:00:C7:06:A1:00:6A:69:1C:37:47:88:52:94:45:C7:E0:DA:8A:47:99:F2:97 CN=Bernd Paysan, OU=dev, O=net2o, L=München, ST=Deutschland, C=DE
and signs with sha1rsa2048 (Google!). If you want to verify the apk yourself, download the certificate, add it to your keyring and check:
keytool -importcert -file firstname.lastname@example.org jarsigner -verify -verbose Gforth.apk
Get it for Windows
You need: A 32/64 bit x86/amd64 Windows. You need to install Gforth from the latest Snapshot first.
Then you install the current net2o snapshot.
Key information (new key for September 22th 2019)
I changed my key to a Certum smartcard based rsa2048 key, this is the first update, and I generated a new key pair for that.
These files are now signed with a sha256rsa2048 certificate with the SHA-1/SHA256 fingerprint
sha-1: 96:0b:7e:b8:cb:7f:52:f6:70:00:bf:23:5e:25:66:c9:eb:9c:d0:3c sha256: 72:BE:1C:EE:D9:4E:20:94:92:7A:13:BC:C6:8F:7C:E9:3F:15:81:F6:6E:91:85:6B:F6:C5:E1:BA:15:22:01:DA E = email@example.com CN = Open Source Developer, Bernd Paysan L = München O = Open Source Developer C = DE
Get it for PC from source
You need: A Linux machine, Windows with Cygwin or better Cygwin64, Mac OS X with fink/brew development tools (please use GCC, don't use XCode's clang, it takes ages to compile Gforth with clang). You could also compile the Android version with Android SDK+NDK, but that's a different story.
You want to have the following packets installed: git automake autoconf make gcc libtool libtool-bin libltdl7-dev yodl emacs libpcre3-dev bison fossil (libtool-ltdl on RedHat/Centos; the libtool-bin is for Debian). Or get Fossil here: fossil
Get the do file (latest revision), put it into your net2o folder, and let it run.
mkdir net2o cd net2o wget https://fossil.net2o.de/net2o/doc/trunk/do chmod +x do ./do
This script will ask for your root password to install Gforth and the a few libraries.